![]() If port is found to be loose/bad, this is really not a repair for the inexperienced because the charge port for your device is soldered to the mother board and the heat generated could cause further damage if not very careful. Still not charging correctly, wiggle the end of cable to see if the camera charge port is loose, not if light flashes, etc. when done cleaning, insert battery and try. Also remove the battery and clean the camera's battery contacts with a pen with eraser on the end or a long Qtip dampened with 90% Isopropyl Alcohol (pen eraser's have a little more grit to them and polish up terminals well), blow out dust, debri, etc. Also look for any damaged terminals if you see one bent very carefully straighten it with a tooth pick. and blow the port out or very carefully pick it out. Samantha Bazant, Look into the charge port with a flashlight, look for dust/lint/etc. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |